EPS molded polystyrene insulation board is a commonly used insulation material. The correct choice of its installation method is crucial to ensure the insulation effect and project quality.
1. Pasting method. This is one of the more common installation methods. First, clean the base wall to ensure that the wall is flat, dry, and free of oil. Then, apply special bonding mortar on the back of the insulation board, paste the insulation board on the wall, and squeeze it to make it fit tightly with the wall. When pasting, pay attention to controlling the thickness of the bonding mortar to be uniform and consistent to avoid hollowing. At the same time, paste in a certain order, from bottom to top and from left to right step by step, to ensure that the splicing between the insulation boards is tight. In order to enhance the firmness of the paste, anchors can be set on the insulation board to further fix the insulation board.
2. Anchoring method. This method mainly fixes the insulation board to the wall through anchors. Drill holes on the base wall, insert anchors, and then connect the insulation board to the wall through anchors. The number and spacing of anchors should be reasonably set according to the size of the insulation board, the material of the wall, and the requirements of the project. The anchoring method is suitable for all kinds of walls, but care should be taken to avoid damage to the wall structure when drilling holes.
3. Mixed method. That is, the pasting method and the anchoring method are combined. The insulation board is first fixed to the wall by the pasting method, and then the anchors are installed for further reinforcement. This method can give full play to the advantages of the two installation methods and improve the installation firmness and stability of the insulation board.
When installing EPS molded polystyrene insulation board, the following points should also be noted: First, it is necessary to strictly follow the construction specifications to ensure the installation quality; second, it is necessary to select suitable bonding mortar and anchors to ensure that their quality and performance meet the requirements; third, during the installation process, it is necessary to take protective measures to avoid damage to the insulation board; fourth, the insulation board after installation should be inspected to find and deal with existing problems in a timely manner.
In short, there are many ways to install EPS molded polystyrene insulation board. In actual construction, the appropriate installation method should be selected according to the specific situation, and the operation should be carried out strictly in accordance with the construction requirements to ensure the installation quality and insulation effect of the insulation board.
